MUX-80 mapping | LabJack
 

MUX-80 mapping

2 posts / 0 new
Last post
norbert.senf
norbert.senf's picture
MUX-80 mapping

Hi:
I have a MUX80 and two CB37's on a T-7 Pro.
Am trying to remap the channel numbers.
Attached is an Excel sheet showing the channels mapped according to Table 1 on this page:
https://labjack.com/support/datasheets/accessories/mux80

Note the 2 blanks - can you clarify? Thanks ............ Norbert Senf

File Attachment: 
LabJack Support
labjack support's picture
Those are N/C (no connection)

Those are N/C (no connection).  See the A2 tables here:

https://labjack.com/support/appendix-oem-pinout-info