T7 pro communication with Labview | LabJack
 

T7 pro communication with Labview

4 posts / 0 new
Last post
Alan
leafmelody1992@gmail.com's picture
T7 pro communication with Labview

Hey officer,

I am a little confused about how to use LabVIEW to record analog input signal from T7-pro.  I cannot find any LJM library in LabView Users libraray window.  Could you give me some suggestions?  Thanks a lot!

LabJack Support
labjack support's picture
Start with the 5 "Getting

Start with the 5 "Getting Started" steps on the LabVIEW LJM page and then feel free to reply back here if you get stuck or have any further questions:

https://labjack.com/support/software/examples/ljm/labview

Alan
leafmelody1992@gmail.com's picture
Hey officer,

Hey officer,

I am a little confused about wifi connection of Labjack T7-pro.  The thing is that when I connect T7-pro via USB, I can change network setting to connect the household wifi.  However, when I uninstall the USB port and then connect it to the socket, I cannot connect my laptop with the DAQ via wifi.  It looks a little contradictory.  

Could you help me to solve the problem?  

Thanks!

LabJack Support
labjack support's picture
So you are having some WiFi

So you are having some WiFi issues?  You will have to provide some more clues about what works and what does not work, but based on your initial description perhaps you have troubleshooting issue #5 from the following:

https://labjack.com/support/app-notes/basic-networking-troubleshooting

In particular see the last paragraph of issue #5.  Download the attached application TCPOpenTestingLJM and try the 3 different types of opens as discussed.

Also see the WiFi troubleshooting tips here:

https://labjack.com/support/app-notes/wifi-and-ethernet-t7-and-t7-pro