T7 pro Digital IO | LabJack
 

T7 pro Digital IO

2 posts / 0 new
Last post
Swami
Swaminathan GS's picture
T7 pro Digital IO

Hi,

I am new to T7 pro. I need info about the digital teminal. With the datasheet and manual, i understood FI00-FI03 is configurable as Digital Input/Output. I need to know if i can connect direct 24v signal from my PLC to the FI00(Configured as DI) ?  will it work.  Please help experts

LabJack Support
labjack support's picture
No, if your PLC is driving

No, if your PLC is driving low-impedance 24V that is too much.  The following app note has more detail:

https://labjack.com/support/app-notes/driven-signals

A quick and easy solution is the LJTick-Divider-4.  Each one of those will handle 2x 24 volt digital signals:

https://labjack.com/accessories/ljtick-divider