T7 Stream with Ethernet Connection

2 posts / 0 new

Tue, 07/27/2021 - 07:35

Catherine

Hello,

I am able to start stream mode on the application LJStreamM when connecting my laptop to the LabJack T7 through USB connection, however it does not work when connecting through ethernet. Attached are the error messages. Various error messages are received while no variables were changed between runs.

Please advice, any suggestions on how to solve this problem are greatly appreciated.

File Attachment:

Screenshot (177).png

Screenshot (179).png

Tue, 07/27/2021 - 14:18

LabJack Support

I would recommend starting by

I would recommend starting by trying to open the device via Ethernet in Kipling, following our troubleshooting guide:

https://labjack.com/support/app-notes/basic-networking-troubleshooting#e...

From there, if you still cannot open the device in the logger, try modifying the open configuration file for the logger and change the identifier parameter to your Ethernet IP. We have a description of the open config files on our logger page in the "DevType, ConnType, & SerialNumber (Opening)" section:

https://labjack.com/support/software/applications/t-series/ljstreamm