Unable to detect LabJack on USB or network | LabJack
 

Unable to detect LabJack on USB or network

4 posts / 0 new
Last post
james.gilbert
james.gilbert's picture
Unable to detect LabJack on USB or network

Since uploading my most recent Lua script and setting it to run on startup, I've been unable to contact my T7 from Kipling at all.  No device found, on multiple machines that all worked previously (all MacOS).

I've tried all suggested 'soft' solutions, such as power-cycling LabJack, host etc. but no luck.  It looks like the device is refusing to respond; perhaps there is a bug in the script, or a memory issue, although nothing was reported when the script was uploaded.

The script seems to be running.. the program is a datalogger looping every 3 s, and every 3 s the COMM and STATUS lights are flashing.

I've searched for a way to do a hardware reset, but found nothing.  Could somebody please advise?

LabJack Support
labjack support's picture
You can clear the T7's

You can clear the T7's settings, including startup scripts, using the FIO2 jumper: https://labjack.com/support/datasheets/t7/spc

james.gilbert
james.gilbert's picture
Thanks, that did the job. May

Thanks, that did the job. May I suggest that this is added to the page on USB comms issues as a last resort? 

LabJack Support
labjack support's picture
Done.  New mode F added.