As of May 2, 2022 the LabJack forums have been set to read-only.
If you are in need of support, please contact us via one of the methods described on our contact page.
Home/Forums/U3/ 3 or more PWM outputs using only 2 timers
Is it possible to have 3 or more PWM outputs on the LabJack U3? I currently have 2 PWM outputs, each using their own timer. They can all be ran at the same frequency. I am using LabView
If your PWM can be slow, you could make PWM in software on any digital line, but for hardware PWM the U3 and T4 are both limited to 2 outputs. For more you need to go to the U6 or T7.
.png%3Fitok=PHGBxf6M "EEV Blog Reviews LabJack T7-Pro & Software Tools")
.jpg%3Fitok=B1YcuDFK)
.png%3Fitok=Ybt-OlgU "LabJack + JEDI One Can Create a Powerful Distributed DAQ Ecosystem")
If your PWM can be slow, you could make PWM in software on any digital line, but for hardware PWM the U3 and T4 are both limited to 2 outputs. For more you need to go to the U6 or T7.