As of May 2, 2022 the LabJack forums have been set to read-only.
If you are in need of support, please contact us via one of the methods described on our contact page.
Home/Forums/U3/ Disable internal pullups on FIO pin
There is no way to disable the pull-up resistors. There should be a way to interface properly with your output; what sort of output do you need to connect to the FIO?
One way to work with an "open" output state such as with a PNP output would be to use a pull-down resistor to overpower the internal pull-up:
.png%3Fitok=PHGBxf6M "EEV Blog Reviews LabJack T7-Pro & Software Tools")
.jpg%3Fitok=B1YcuDFK)
.png%3Fitok=Ybt-OlgU "LabJack + JEDI One Can Create a Powerful Distributed DAQ Ecosystem")
There is no way to disable the pull-up resistors. There should be a way to interface properly with your output; what sort of output do you need to connect to the FIO?
One way to work with an "open" output state such as with a PNP output would be to use a pull-down resistor to overpower the internal pull-up:
https://labjack.com/support/app-notes/open-collector-signals