I using the DAQ Factory lite software for data logging using my U3-HV. All OK for unipolar signals but recently there was a need to log bi-polar signals that are in teh range of +/- 5V .
Can anyone suggest how to create a conversion formula for this to use in DAQFactory ? Or it will be good if I can get a link to a document that outlines how to measure bi-polar signals with U3-HV.
Thanks
.png%3Fitok=PHGBxf6M "EEV Blog Reviews LabJack T7-Pro & Software Tools")
.jpg%3Fitok=B1YcuDFK)
.png%3Fitok=Ybt-OlgU "LabJack + JEDI One Can Create a Powerful Distributed DAQ Ecosystem")
To measure +-5V you will need to use the HV AIN on the U3-HV as the low voltage AIN (flexible IO) are not capable of measuring that range. See our AIN specs here:
https://labjack.com/support/datasheets/u3/appendix-a
The range on the HV AIN are -10V to 10V, so you can do a normal single ended measurement on those channels to measure +-5V.