OEM Pinouts

4 posts / 0 new

Tue, 07/02/2019 - 21:41

RGrunwell

OEM Pinouts

Hi again-

I'm looking into getting just your PCBs (OEM), and found the .dxf file with the hole locations, but I haven't found which pins are which. I surmise that one of the 2x4 set of holes have SGND, SPC, VS, FIO7 - FIO4, and GND. The other probably has VS, GND, DAC0 & 1, FIO0 - FIO3. And the one near the DB15 has the EIO and CIO. But I have not found anything that tells which are which. I could Ohm out the one I have, but would prefer not opening it up. =)

Could you send the pinouts please?

Thanks for all your help!

-Randy

Wed, 07/03/2019 - 09:24

LabJack Support

This U3-OEM section should

This U3-OEM section should tell you what you need:

https://labjack.com/support/datasheets/u3/hardware-description/u3-oem

Wed, 07/03/2019 - 17:56

RGrunwell

Thanks! You might want to

Thanks! You might want to include this link on the page with the .dxf link. =)

Fri, 07/05/2019 - 10:18

LabJack Support

I would agree that many

I would agree that many people interested in Section 2.12 will also want Appendix B, and vice-versa, so links between them make sense to me. I'll mark this for our expert in that.