Hig Guys,
I hope you are alright. I have no choice but to use a pressure sensor that output a 4-20mA, signal, the signal must be converted to 0-10v so it can be read by the AIN inputs on the U6. 0-10v volt is prefered to reduce the inaccuracy.
Please can you advise if you offer something that converts 4-20mA signal to 0-10V DC, if no please can you advice me where can I but such a tool.
Thank you
Please see our current measurement application note:
https://labjack.com/support/app-notes/measuring-current