Advanced search
Hi! I am using LabJAck U6 and would like to have one analog input and two timers in stream mode.
For analog input there is no problem, but I don t know how to do it with timers. Any suggestion?
Before configuring stream mode, configure your timers.
When configuring stream mode, use the timer channels documented here in your scan list:
https://labjack.com/support/datasheets/u6/operation/stream-mode/streaming-inputs-timers-counters
Note for one timer you stream two channels, Timer# and TC_Capture, which is further documented in the link above.
.png%3Fitok=PHGBxf6M "EEV Blog Reviews LabJack T7-Pro & Software Tools")
.jpg%3Fitok=B1YcuDFK)
.png%3Fitok=Ybt-OlgU "LabJack + JEDI One Can Create a Powerful Distributed DAQ Ecosystem")
Before configuring stream mode, configure your timers.
When configuring stream mode, use the timer channels documented here in your scan list:
https://labjack.com/support/datasheets/u6/operation/stream-mode/streaming-inputs-timers-counters
Note for one timer you stream two channels, Timer# and TC_Capture, which is further documented in the link above.