I am trying to do some testing on data from my U6-Pro using the Labview software but I am unable to change the Resolution Index of the AIN inputs. I will need the highest resolution possible accepting near 10V inputs at approximately 1 Hz.
I am trying to do some testing on data from my U6-Pro using the Labview software but I am unable to change the Resolution Index of the AIN inputs. I will need the highest resolution possible accepting near 10V inputs at approximately 1 Hz.
.png%3Fitok=PHGBxf6M "EEV Blog Reviews LabJack T7-Pro & Software Tools")
.jpg%3Fitok=B1YcuDFK)
.png%3Fitok=Ybt-OlgU "LabJack + JEDI One Can Create a Powerful Distributed DAQ Ecosystem")
What example VI are you trying?
Are you getting an error?
If you are using one of our examples that sets ResolutionIndex, and you are not getting an error, then it is likely working. To tell if it is working look at a handful of readings to gauge the noise level and compare to Appendix B:
https://labjack.com/support/datasheets/u6/appendix-b