As of May 2, 2022 the LabJack forums have been set to read-only.
If you are in need of support, please contact us via one of the methods described on our contact page.
I am trying to read EI-1050 in SCADA INDUSOFT. Currently i do use U9 via TCP/IP, managing communication via modbus bus protocol. May i know how to establish to read EI-1050 via tcp/ip.
The UE9 does not support EI-1050 communication over Modbus. The only LabJack device that can do that is the T7. To use an EI-1050 probe with the UE9 we need to call some driver functions described here: https://labjack.com/support/datasheets/accessories/ei-1050
.png%3Fitok=PHGBxf6M "EEV Blog Reviews LabJack T7-Pro & Software Tools")
.jpg%3Fitok=B1YcuDFK)
.png%3Fitok=Ybt-OlgU "LabJack + JEDI One Can Create a Powerful Distributed DAQ Ecosystem")
The UE9 does not support EI-1050 communication over Modbus. The only LabJack device that can do that is the T7. To use an EI-1050 probe with the UE9 we need to call some driver functions described here: https://labjack.com/support/datasheets/accessories/ei-1050
Thank you, I will proceed to purchase the T7.